A+ Easy & Safe to use, Micro Bidet

No battery or electricity(Cold Water Only)

Cold water…but it’s very useful for health. And the water is not very cold because the bath is in doors. Water Supply -Direct Connection to the water Mains Cleansing Nozzle -Horizontal Sliding Single Nozzle with Cover Material -ABS, PP, PE, Silicone Size -Nozzle: L115 x W80 x H60 , Controller: L72 x W65 x H55 Length of the hose – 50mm controller ~ nozzle,100mm water pipe ~ controller Made inChina, 2013 Weight -500g(Original box with all parts) Installation -Fits all 2-piece toilets and most1-piece toilets What’s in the box -All parts Suction Cup(plastic type) – 2pcs for Nozzle Unit, 1pc for Controller T-adaptors - ?(inch) T-valve adaptor(1pc), ??(inch) T-valve adaptor(1pc) ??(inch) T-valve adaptor(1pc) all-in-one Suction Cup and double-sided tape

Installation

You should choose one of the following for installation.

If the size of the water pipe is?(inch), you can use ?(inch) adaptor without any other parts.

If the size of the water pipe is ??(inch), you can use ??(inch) adaptor without any other parts.

If it is not both?(inch) and??(inch), you can use the inlet valve of the water tank.

If you choose the third, follow the next message.

If you choose the third, you can use the ??(inch) adaptor.

Assemble??(inch) adaptor and the inlet valve connection end of water supply at the bottom of cistern. When you assemble this, the water supply in the tank can be rotated. So please take care not to rotate the float arm screw of the water supply in the tank.

etc. - refer to the installation manual for details.

Cautions

This Smart Bidet isCold Water Only andNo warm air dryer. When you install the Nozzle Unit with the suction cups on the toilet bowl, install2 small double-sided tapes first. And install controller like Nozzle Unit. After washing,use toilet paper to wipe off the water. This model has no warm air drying function. Check pipe size in your toilet before installation. ?(inch) plumbing or “(inch) plumbing or(inch) plumbing. ?(inch) is the World wide standard size, (inch) and(inch) are used in some countries. Fully insert the hose into the connector and fasten the fitting nut tightly using the nut tightening tool. When you assemble the adaptor and the inlet valve connection end of water supply at the bottom of cistern,please be careful not to rotate the float arm screw.

Cautions for Controller Installation

Clean the surface

rip a thin vinyl(and a thin paper) out of the double-sided tape,just only a thin vinyl(and a thin paper)

attach the Suction Cup with double-sided tape to flat part of water tank or wall, just onlyflat part

ackage Included:
1x Smart Toilet Seat Bidet Set

Note:
Please allow minor error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.